MP Aluminium Distributor Clamp

MP Aluminium Distributor Clamp for 25HP / 36HP engines.
These Aluminium clamp replaces the stock steel distributor fixing and is intended to make ignition timing adjustment easier.
As the clamping-bolt is screwed directly into the threaded Aluminium clamp You don´t need a second wrench to hold the clamping-bolt nut as with the original part. By this Your spare hand is able to adjust and hold the distributer while tightening up the clamping-bolt.
The distributors diameter directly above its shaft has to be no larger than 1 11/64 of an inch. With some aftermarket distributors it may be necessary to slim this distributor area on a lathe.

Aluminium Distributor Clamp and Clamping-Bolt: 39,57 €

Distributor Clamp

Ausverkauft

+ Warenkorb

Anfrage